Selected:

Ford dummy OBD port with powered siren

£59.00

Ford OBD alarms
ford obd module replacement with dummy obd

Ford dummy OBD port with powered siren

£59.00

Clear
SKU: Siren4 Category:

Description

THE LEAD IS MODIFIED TO APPEAR TO BE A LIVE OBD Port.
THE LEAD IS MODIFIED TO APPEAR TO BE A LIVE OBD Port. This dummy OBD port is connected with piezo alarm siren. When thief tries to connect OBD tool siren activates and only red button can deactivate siren. 
 
Simple Plug and Play. Takes Minutes To Fit. 
 
Will fit without modification to all Ford models
1. These leads are made using new genuine Ford OBD ports. These ports are not normally available unless you purchase an entire wiring loom.
2. Wires wrapped in the same canvas tape Ford uses on their wiring looms and use Bi-colored wires so it will look identical the original when fitted.
3. To fit simply remove pull off the dash lower panel which is held by clips then unclip your original port and clip the dummy in its place. Then plug the black male connector on the dummy into your genuine port. Now relocate the original to a place of your choosing out of sight to a thief. Finally using the cable ties supplied strap the dummy lead to your cars wiring loom to make it look like the original port.
4. Most of these devices are pre-programmed so that when they plug into a vehicle, the alarm is turned off during the ‘hacking’ process. Once ‘hacked’ these devices usually then program a new key or trick the vehicle into thinking the key is already present. In many instances, this process can take less than 30 seconds before the thief can drive the vehicle away. Another major issue facing the automotive industry as vehicles become more connected and integrated into owners lives is the threat that sensitive personal information stored in the vehicle may also be hacked and stolen using the same process and access through the OBD port.
Protector has been fully independently tested to ensure when fitted, it does not have any negative effect on a vehicle.
Installation takes approximately 15 minutes if your comfortable removing a few trim panels you will be able to install the Dummy OBD Port.
We have dummy OBD for all cars if you are not sure about products compatibility always feel free to contact us!!
Shipping takes around 4-10 working days in Europe and UK.

Additional information

Ford model

B-Max (2012-…), C-Max (2003-2010), C-Max II (2013-…), Crown Victoria (1998-2012), Ecosport (2003-2012), Ecosport (2014-…), Edge I Phase II (2011-2014), Escape (2013-…), Explorer (2006-2010), F150 (2015-…), Fiesta (2008-2012), Fiesta (2012-2017), Fiesta (2017-…), Focus (2004-2011), Focus (2011-2018), Ford Ranger (T6) (2011 – …), Fusion (2005-2012), Fusion (2013-2015), Galaxy (2006-…), Ka (2008-2014), Ka+ (2014-…), Kuga (2007-2012), Kuga (2013-…), LCF (2006-2009), Mondeo 3 (2007-2014), Mondeo 4 (2014-…), Mustang (2015-…), S-Max (2006-2015), Tourneo Connect I (2002-2013), Tourneo Connect II (2014-2017), Tourneo Courier (2014-2017), Transit (2000-2012), Transit (2013-…), Transit Connect II (2013-…), Transit Custom EU5 (2012-2017), Transit Custom EU6 (2017-…)

Related products

Close Menu
×
×

Cart